Creating Bootable Pen Drive Using Windows Command Prompt

Creating Bootable Pen Drive Using Windows Command Prompt

Published  by christy 
Making a pen drive bootable is possible in Windows7 & Windows8 operating system. Formatting a computer to install fresh Windows OS with a CD/DVD drive is not very good because it takes too much time to install fresh Windows operating system. There can also be a problem for many people that CD/DVD drive doesn’t work properly. So this can be a problem for them. Today laptop or desktop comes many USB ports. So there is no need of CD/DVD drive to format a system. Formatting is very fast and easy with flash drive/pen drive and also no software is required for this method. Windows7 or Windows8 command prompt can do the work with few lines of command. Just follow this tutorial.
Start your command prompt.
 For windows7 users:
Go to “Start” button and click. Write “cmd” then cmd icon will appear on the top of the panel. (Fig.1)
Starting Windows CMD
Fig.1-Starting Windows CMD
“Right click” on the cmd icon and click “Run as administrator”(Fig.2)

Running Command Prompt As Administrative
Fig.2-Running Command Prompt As Administrative
It will open the command prompt. (Fig.3)
Windows 7 CMD Window Pops Up
Fig.3-Windows 7 CMD Window Pops Up
For windows 8 users:
Press “Windows key” and press “c”. You will see the command prompt icon. “Right click” on the command prompt icon and click “Run as administrator” from the bottom bar. (Fig.4)
Windows 8 CMD Window Pops Up
Fig.4-Windows 8 CMD Window Pops Up
It will open the command prompt like in Fig.3
Now following steps are same for the windows7 and 8 OS.
Type “diskpart” inside the command prompt and hit “ENTER”(Fig.5)
Type diskpart And Enter
Fig.5-Type diskpart And Enter
It will good before going to next step that you should disconnect all other external hard disk, flash/pen drive etc. because accidently these drive can be formatted. So taking precaution is good. Only one pen drive with minimum 4 GB should be connected. Save all the data from the pen drive because it will be formatted in one of the following step.
After last step type “list disk” inside the command prompt and hit “ENTER”(Fig.6)
Type list Disk And Enter
Fig.6-Type list Disk And Enter
This will show all disk connected to the system like DISK 0, Disk 1, and so on with “Status”, “Size” , “Free” etc.. We can recognize the pen drive with size. Disk 0 will be the system disk in which the windows OS is installed. In this tutorial Disk 1 is the pen drive (3855MB=4GB). This pen drive is going to be a bootable pen drive.
Type “select disk 1” inside the command prompt and hit “ENTER”. It will select the disk 1 (pen drive) for all coming steps. (Fig.7)

Type select Disk 1 And Enter
Fig.7-Type select Disk 1 And Enter
Type “clean” and hit “ENTER”. It will erase all the data from the pen drive. (Fig.8)
Type clean And Enter
Fig.8-Type clean And Enter
Type “create partition primary” and hit “ENTER”. It will create a primary partition in pen drive. (Fig.9)
Type create partition primary And Enter
Fig.9-Type create partition primary And Enter
Type “select partition 1” and hit “ENTER”. It will select the partition created in the last step. (Fig.10)
Type select partition 1 And Enter
Fig.10-Type select partition 1 And Enter
Type “format fs = ntfs quick” and hit “ENTER”. It will format the pen drive quickly with NTFS file type. (Fig.11)
Type format=fs quick And Enter
Fig.11-Type format fs=ntfs quick And Enter
Type “active” and hit “ENTER”. It will make partition as active for booting after restarting the computer. If this step is missed then computer will not boot from the pen drive. (Fig.12)
Type active And Enter
Fig.12-Type active And Enter
Type “exit ” and hit “ENTER” to close the diskpart and close the command prompt window. (Fig.13)

Type exit And Enter
Fig.13-Type exit And Enter
Now the pen drive has become bootable. Now all the files from root of Windows operating system setup DVD or ISO has to copy inside the pen drive root.
So open the Windows setup file from DVD or ISO and copy all file by selecting with “Ctrl+A” and paste it inside the pen drive’s root folder as shown in the figure. (Fig.14)
Copying All Files And Pasting It
Fig.14-Copying All Files And Pasting It
After complete copy, the pen drive will be a bootable for Windows 7 and Windows 8 OS completely. You just need to “Restart” your computer. “Restart” your computer. When BIOS screen appears then press “F12” key. It will show the options to boot from CD/DVD drivehard disk and pen drive. Just scroll down to pen drive and hit“Enter”. Your system will boot from pen drive. Now you can install windows OS.
That’s it.
Enjoy…
Wednesday, 10 December 2014
Posted by christy

GIONEE MARATHON M3 SMARTPHONE REVIEW 7.4 User Rating: 3.88 (3 votes)

Gionee Marathon M3 - Top EdgeGIONEE MARATHON M3 SMARTPHONE REVIEW

7.4
User Rating: 3.88 (3 votes)
The highlight about this smartphone is its massive battery rating of 5000mAh. There are times when the people hate the battery life of Android smartphones. For those worried consumers, Gionee have introduced this smartphone. We have been testing the device for the past week. Now here are our thoughts on the device.
Gionee Marathon M3

DESIGN

First talking about the design. The Marathon M3 does not intend to appease anyone with its looks. Rather it is more focused on a singular point. The device feels lighter for a massive 5000mAh battery. Though, it is relatively heavier than most of the devices in the market. With a metal built non-removable battery inside it, you cannot expect it to be a lighter device. It does have pretty decent look and feel, while bulkiness comes with battery size. The finishing and built quality is quite good.
The design aesthetics are clearly similar to the M2. In the front of the device, you will find the front camera with sensors and earpiece above the display. On the right side, there are Volume rocker keys and power button. The left side is empty, while there are microUSB port and primary microphone at the bottom. On the top edge of the device, there is a 3.5mm headphone jack given. The back panel is made of matte finish plastic and features the primary camera with LED flash. There is also a secondary microphone placed alongside the camera module. While the loudspeakers are located at the bottom.

DISPLAY

Coming to the display on Marathon M3, which is 5-inch 720p, and having 294 PPI density. The display manages to be quite visible in the direct sunlight exposure. While it is not the best HD displays we have seen, compared to the Moto G 2014, which has same PPI. But it offers pretty decent sharpness and the viewing angles. We have had no complaints regarding the touch screen responsiveness.

HARDWARE/PERFORMANCE

Next up is the Hardware on Marathon M3. The device is powered by a Quad-core Mediatek processor, clocking at 1.3GHz. It is complimented by Mali-450 Graphics and 1GB of RAM. The device has 8GB of internal storage, out of which less than 2 GB of storage is available to use. As Gionee has more than 2.5GB of bloatware installed. While the microSD card supports expansion of up to 128GB, which is pretty incredible. The Gionee has also added the USB OTG functionality on the Marathon M3. It allows you to attach the flash drive to access media directly from it.
Gionee Marathon M3 - Internal Storage
The gaming is pretty good on the device as we didn’t experience any lag on the pre-installed games. While there is a noticeable lag in the games like Asphalt in high graphics. Though, it won’t bother your gaming experience much. And also you don’t have to worry about the battery life while playing heavy games. As it would easily last for around two days, depending on your heavy usage. The battery juice can last for around a week, if the device is on standby with little usage from time-to-time.

SOFTWARE

As for the software, the Marathon M3 is running on Android 4.4.2 Kitkat OS. It is layered with Gionee’s customized interface. It is not exactly the Amigo UI we see on the flagship Gionee devices.  But the interface does resemble the Amigo UI elements. As there is the Amigo paper and bunch of other apps are pre-installed on the device. Compared to the UI on M2, the customized OS on M3 feels more polished and organized. Well, it is not the greatest interface, but it manages to provide some good features. It is a recommended UI for users who like to customize their smartphones a lot. As there are lots of ways, Gionee has provided to change those looks.

CAMERA

Talking about the camera on the Marathon M3. The primary camera on the device is 8MP and comes with LED flash. It is exactly the same camera module, which is present in the M2. It allows you to take decent photos during daylight, as we experienced that. While the photos in low-light were missing the details as the visibility is very low. When using LED flash, the photos seemed to be washed out as the brightness was too much on the most part of the subject. And even when the subject was placed quite far.

CONS

With a large battery size, this device is a sure catch, but it has its cons too. While the most annoying part is the bloatware. Gionee has been known to provide an unnecessary number of apps with their handsets. While Marathon M3 is not an exception. Whereas some users like that they have got pre-installed apps with their handsets. While many doesn’t want a smartphone that is full of bloatware. To uninstall these apps, users need to root their device. Which is somewhat of a hectic task for first-time users.
Another thing that Gionee might have done better is regarding the availability of the device. Even though, it has been announced in India, it is hard for consumers to get this phone. Because it is only available on eBay, the device has not hit the offline stores yet.

VERDICT

With decent specs sheet and performance, the Marathon M3 is quite a good catch in this price range. Only if you can compromise the fact that it will come with bloatware. While the USP of the device remains the same, which is the 5000mAh battery rating. Comparing its weight, the device is little lighter in weight against the Redmi 1S. It is quite amazing for the battery that is more than 2 times the size of Redmi 1S. You know, at the price of INR 13K you can’t ask for the high-end specs.

Gionee Marathon M3 QUICK SPECS

STARTS FROM Rs. 12154

VIEW FULL SPECIFICATIONS COMPARE THIS PHONE

SPECS
SCORE (74/100)
PRICES
OSAndroid 4.4 KitkatProcessor1.3 GHz quad core
TouchscreenCapacitive TouchscreenDisplay Resolution1280 x 720 pixels
Display5" IPS-OGS DisplayPrimary Camera8 MP
Dimensions144.5 mm x 71.45 mm x 10.4 mmWeight180.29 g (w/o battery)
Posted by christy

Translate

Popular Post

Powered by Blogger.

Followers

amazon.in

amazon.in
todays deals

- Copyright © Cyber Bird - Posting For You - Powered by Blogger - Designed by christy m thomas -